Since this is a super habit lens, normal shooting is not possible.
Suitable for standard photographic bokeh lenses. I would opt for an entirely different lens that works with your camera as-is or with a pre-existing adapter. Other lenses known for producing swirly bokeh include those in the Helios series. I have also encountered lenses that produce mild swirly bokeh that is most noticeable with foliage in the background. You may even already have one without having previously noticed the swirl.PETZVAL BOKEH MODIFIED Lens from HELIOS-44M for Sony E-Nex /Canon EF / Micro 4/3 / Nikon / Fujifilm If you feel the lens is worth the additional cost, you can consider hiring someone else to do the conversion for you, as Michael C recommends. You can cut off the threads and drill screw holes into a thin lens reversal adapter for MD mount. (Search for "Minolta MD reverse ring". Look at the pictures to find the thinnest one available.) Since the FFD of MD and EF are similar, the lens would likely still focus to infinity. The feasibility of modifying the lens depends on its specific construction and design. Although there is no aperture or autofocus mechanism to complicate conversion, I would not bother attempting conversion myself, unless the lens was particularly cheap, like less than $10.Ĭonverting to M42 is not as simple as just cutting some threads because the FFD of M42 is 45.46mm. You would need to shorten the barrel by 1.46mm. Given the apparent design of the mount portion of the adapter, just shaving the barrel down would not work. However, since the lens is available in Nikon F mount, the built-in focusing mechanism probably has enough "play" to allow infinity focus after altering or replacing the mount. The FFD of M42 is 45.46mm. There is -1.45mm of space in which to place an adapter, and the EF mount is too large to sink into an M42 mount.
There is no pre-existing EF-M42 adapter that I'm aware of (in case you thought to combine EF-M42 + M42-MD adapters). The FFD of EF is 44mm. There is no pre-existing EF-MD adapter that I am aware of. The Flange Focal Distance (FFD) of MD mount is 43.5mm, while the FFD of EF mount is 44mm. That's only 0.5mm for an adapter without optics. For a hypothetical adapter with optics, you'd likely be multiplying focal length by 1.4x, so 85mm → 128mm.
There is no combination of pre-existing adapters that will allow you to use the lens with your camera. I'd recommend getting on some old "legacy lens" forums and finding out if anyone knows someone in your area/country that you could pay to do the conversion for you.įailing that, you'd probably be better of to just sell it to someone who wants the lens in EF mount and find another deal on a legacy lens with similar properties. There are a few people/places that are well-experienced in modifying lenses from one mount to the other. I would not recommend trying this yourself, however. So even though it is a newer lens with modern lens coatings, in terms of the mechanics of the rear of the lens it is essentially an old legacy type lens with modern bayonet mount flanges on the back. There are no electrical contacts at all on the back of this lens to worry about.
#Petzval bokeh lens ef manual#
It's also a manual focus only lens, so there's no issue with AF communications. It has a set of Waterhouse stops that are mechanically switched by the user. But the lens in question does not allow the camera to control the aperture at all. Normally, you'd still have the problem of not being able to control the electronic aperture of an EF lens. One could then use an M42 to MC/MD adapter, which are commonly available, to use the lens on a camera with the Minolta MC/MD mount. Since the same lens is also offered in the Nikon F-mount, it's almost certain there's enough room at the back to shorten it to M42 length without getting into any internal parts of the lens. It is theoretically possible to reduce the barrel length by 1.46mm and replace the EF mount with an M42 threaded flange.
0 kommentar(er)
